fiat decatto wheel barings (1 Viewer)

[Beacons]

We need new barings for our fiat hymer 1996 2.5
Can any one advise dealer in wales /hereford border
we idealy would like to get this weekend as ours went today onthe rear left side many places closed today
so is proving difficult to find many thanks.

 

[Phill D]

tall order me thinks. if you could find a garage with time and space it would probably take till Tuesday to get the spares. hope i am wrong.
good luck.

 

[Beacons]

Hi got the garage time and space just need the parts .

^{_{Subscribers  do not see these advertisements}}

 

[DBK]

There are specialist outlets for bearings, if there is one near you (Google to find) they may be able to help but they may only be open Saturday morning if at all over the weekend.
It won't be a Fiat part, just a bearing which does the same job. You will need to take the old bearing to them so they can measure it.

For example: http://www.bearingsuppliersclydachsa6.co.uk/

 

[martin1485]

Try Europarts here: http://www.eurocarparts.com/car-parts
Put your registration in and they list everything for your vehicle. They are open tomorrow and if in stock, you should be able to do a click and collect from a local branch

 

[Techno]

Try eurocarparts online
EDIT Doh! too slow

^{_{Subscribers  do not see these advertisements}}

 

[rangi]

Got our new ones for the front wheels from MILLS AUTO PARTS

 

[Phill D]

any of these any good

http://www.eurocarparts.com/wheel-b...LAyrLh8wOxVz4GluDxWkFOdsof5_i74AKcBoCC6_w_wcB

they have a store for click and collect in Hereford at HR4 9QL probably open tomorrow

good luck

 

[dave newell]

Just be aware that if its only rear wheel bearings then no problem but if its fronts and a Maxi chassis you will need a BIG hydraulic press, I did one recently and it took a 50 tonne press to remove the drive flange from the bearing and then the bearing from the hub carrier.

D.

^{_{Subscribers  do not see these advertisements}}

 

[Beacons]

Thanks just rear at moment there is slight
play in the front barings would you recommend changing those the mot picked the front up wednesday but the rear left went today. Many thanks mike.

 

[f6c]

Euro parts

 

[Beacons]

Thank you all for your kind advice
many thanks mike &jan.

^{_{Subscribers  do not see these advertisements}}

 

[dave newell]

There should be zero play in Ducato front wheel bearings as they are a pre loaded taper roller setup, any play evident is due to wear and they WILL fail, probably sooner rather than later. Another point is the centrla hub nut on front wheels, it is VFT, either 380 or 420NM depending on shaft diameter.

D.

 

[Wildbill]

call theas I order two front Barings at 3pm arrived next day at 930am
http://coastalmotorhomes.co.uk/

 

[Beacons]

There should be zero play in Ducato front wheel bearings as they are a pre loaded taper roller setup, any play evident is due to wear and they WILL fail, probably sooner rather than later. Another point is the centrla hub nut on front wheels, it is VFT, either 380 or 420NM depending on shaft diameter.

D.

Thank you for this information we have already asked the garage to sort the front wheels as well and mike will be showing your post to them again many thanks.

^{_{Subscribers  do not see these advertisements}}