Control Panel

Discussion in 'Trigano' started by Chrisdal, Mar 8, 2009.

  1. Chrisdal

    Chrisdal Read Only Funster

    Joined:
    Mar 7, 2009
    Messages:
    3
    Likes Received:
    0
    I am still trying to find ot why my control panel does not show that 230v are connected. This is a new van to me (2008 Trigano650) and I am sure it was illuminating before I had an ariel fitted. Can anybody offer some help.
    Thanks
     
  2. pappajohn

    pappajohn Funster Life Member

    Joined:
    Aug 26, 2007
    Messages:
    29,443
    Likes Received:
    16,872
    Location:
    YO11 2BD
    hi,
    did the aerial installers have to remove the panel for any reason ?

    if so they may have accidently disturbed the wiring.

    did you check the battery charger/power supply is turned on ? the light may run on the 12v side.

    if possible you could remove the panel and see if any wires have come loose or even see if it was ever connected.

    it could just be the LED/neon/bulb has blown.
     

Share This Page