Control Panel Resetting

Discussion in 'Hymer' started by Hymerjo, Apr 11, 2011.

  1. Hymerjo

    Hymerjo Funster

    Joined:
    Feb 12, 2009
    Messages:
    5
    Likes Received:
    0
    Location:
    Staffordshire
    Recently added extra Liesure battery to my B655 - previously control panel readout said 72ah - now after adding second identical battery readout says 50%.
    Contacted Hymer Uk they say adding a 2nd liesure battery alters the charge rate and could cause serious problems. Not willing to tell me how to readjust the control panel setting - I guess they just want the job!!
    Any clever members know the secret of reprogramming the menu to fix the readout?:Doh:
     
  2. goldwinger

    goldwinger Funster

    Joined:
    Apr 8, 2008
    Messages:
    63
    Likes Received:
    5
    Location:
    Snaith
    Hymerjo, the system my take 24 hrs to charge both batteries up to max, plug it in to the mains via hook up.
    On the Schaudt control panel.

    1. Press the battery button.
    2. Press the menu button for more than 3 seconds. The current maximum battery capacity is displayed.
    3. Press the menu button again. The battery capacity will begin to flash.
    4. Use the + or- buttons to adjust the the display to the capacity of the new battery.
    5. Confirm by pressing “OK”
    6. Exit by pressing any button or waiting 20 seconds.
    7. Your new battery parameters are now set.
    8. You’ll also have to reset the date & time.
    9. Hook up & fully charge the new battery.
     
    • Like Like x 1
Loading...

Share This Page