changing gas regulator (1 Viewer)

[con-tiki]

The gas regulator on my Hymer has a screw on type connection (pic 1+2) ) Would it be ok to change to this one (pic 3).

Shirl

 

[jhorsf]

they both seem to say 37mb so I would say yes

assuming of course it has the same fittings ie; left hand thread to cylinder

 

[con-tiki]

the bp lite gas cylinder I have does not have a threaded connection. Pic no 3 is the regulator that fits it. There was no gas bottle with the MH when I got it.

Shirl

^{_{Subscribers  do not see these advertisements}}

 

[bobandjanie]

Hi, the difference is one is 1 kg per hour and the new one is 1.5 kg per hour, saying that the one on our van is 1.5 so I would say it would be OK. Bob.

 

[jhorsf]

they are both set to regulate to 37mbar so yes, now I understand Shirl you have a bp lite and the reg = CLIP ON fits that so yes ok.

 

[con-tiki]

Thanks a lot.....

Shirl

^{_{Subscribers  do not see these advertisements}}

 

[ubuntu1]

Regulator

How old is it (the new one) because it should be replaced at ten years old anyway?