- Jul 1, 2010
- 3,198
- 33,220
- Funster No
- 12,394
- MH
- Hymer B 588 DL
- Exp
- Since September 2010
Noticed cab area especially passenger side was a tad cool in the frosty weather last weekend. Had a quick look underneath and the Gaffer tape I'd sealed off the Fiat vents on passenger side was peeling off. Whipped out both vents, trimmed the thin mouldings off fronts (Stanley Knife) and gave a quick rub with sandpaper. Then marked out and cut a couple of covers (from the base of a black plastic seed tray) and stuck them over the vents with Sikaflex. See photo's, I know you can buy the proper sealed vent covers from Fiat but its a 35 miles hike to my nearest dealer so I did a cheapo mod.
Will refit in morning once Sikaflex has cured properly. For anyone interested in doing something similar vents just pop out as only held by 4 moulded plastic clips.
Will refit in morning once Sikaflex has cured properly. For anyone interested in doing something similar vents just pop out as only held by 4 moulded plastic clips.
Attachments
Last edited: