Bailey front dinette bed

Discussion in 'The Beginner' started by Boris bailey, Jun 13, 2016.

  1. Boris bailey

    Boris bailey Read Only Funster

    Joined:
    Jun 13, 2016
    Messages:
    5
    Likes Received:
    1
    Location:
    Warrington
    Hi all. I've recently purchased a bailey 765 and for the life of me I can't make the front dinette cushion jigsaw. I know I should of asked the dealer for a demo but excitement took over and how hard could it be. Well I think I have tried every combo but to no avail. Would be very grateful if anyone could help.
     
  2. DanielFord

    DanielFord Funster

    Joined:
    Jun 1, 2013
    Messages:
    2,195
    Likes Received:
    2,483
    Location:
    Surrey
    This may, or may not help, since I had to solve the jigsaw in our sundance. It could be similar.
    First (obviously) remove table, and insert in between the seats.
    Slide out the cushions at the top of the seat backs, these will have a rigid back, and they fit on the slide outs.
    Then slide out the lower back pieces and put the on top of the table.
    Viola! A bed! :D

    (Deliberate spelling mistake by the way!) LOL
     
  3. rosierose

    rosierose Funster

    Joined:
    Apr 29, 2014
    Messages:
    1,042
    Likes Received:
    2,793
    Location:
    Suffolk/Norfolk Border
    Does this help?

    upload_2014-12-22_14-42-13-2.png
     
    • Like Like x 1
  4. Louis

    Louis Funster

    Joined:
    Mar 29, 2016
    Messages:
    213
    Likes Received:
    102
    Location:
    Anglesey
    Bet you can't do that again after a few bottles of wine?:party3:
     
  5. deanroofing

    deanroofing Funster

    Joined:
    Nov 20, 2011
    Messages:
    288
    Likes Received:
    246
    Location:
    bedfordshire
    We got AA 745 and apart from the dinette bed it's a great layout for us, pain in the arse to make that bed properly as you have to use every cushion and the ones that are velcrode are a pain to take off and put back.
     
  6. rosierose

    rosierose Funster

    Joined:
    Apr 29, 2014
    Messages:
    1,042
    Likes Received:
    2,793
    Location:
    Suffolk/Norfolk Border
    Who's been talking?! :D:D

    Actually, I found the pic on t'internet...I've got an Autotrail :p
     
    • Funny Funny x 1
  7. Melvin

    Melvin Funster

    Joined:
    Jan 22, 2016
    Messages:
    107
    Likes Received:
    81
    Location:
    Norfolk
    Hi Boris, I have a 765 and have just realised that I don't know how to makeup that bed either as the only extra cushions supplied (2 small ones) don't seem large enough . IF you find out before I get a chance please post and I will do the same .
     
  8. Melvin

    Melvin Funster

    Joined:
    Jan 22, 2016
    Messages:
    107
    Likes Received:
    81
    Location:
    Norfolk
    Hi just had a play around with the cushions on the dinnette bed and found that they fitted the base .
     

    Attached Files:

  9. deanroofing

    deanroofing Funster

    Joined:
    Nov 20, 2011
    Messages:
    288
    Likes Received:
    246
    Location:
    bedfordshire
    It's better if you turn the cushions with the knee roll in upside down you won't have the lumps sticking upwards.
     
Loading...
Similar Threads
  1. Alan-2016
    Replies:
    1
    Views:
    216
  2. Fatbelly
    Replies:
    4
    Views:
    444
  3. Gillus
    Replies:
    43
    Views:
    2,324
  4. poppyfields
    Replies:
    8
    Views:
    865
  5. SwissBob
    Replies:
    7
    Views:
    565

Share This Page