Ace genove

Discussion in 'Ace Milano Motorhomes' started by Pixie, Jun 17, 2010.

  1. Pixie

    Pixie Read Only Funster

    Joined:
    Jul 23, 2008
    Messages:
    9
    Likes Received:
    0
    Location:
    Maidstone, Kent
    Can anyone tell me why the steps will not retract when the engine is switched on of my ACE Genova motorhome. The fuse has been changed several times but only works a few times before it blows again. The supplier has replaced the fuse three times and they cannot give me any explanation why it will not work.
     
  2. Johns_Cross_Motorhomes

    Johns_Cross_Motorhomes Trader - Motorhome & Accessory Sales

    Joined:
    Jan 5, 2008
    Messages:
    9,246
    Likes Received:
    5,197
    Location:
    East Sussex 01-580-881288
    The step motor is drawing too much current to make it work and eventually blows the fuse.

    Possibly because the emchanism is dirty, gunged up so the motor has to work too hard, or the motor is faulty.

    Peter
     
  3. DESCO

    DESCO Read Only Funster

    Joined:
    Mar 11, 2009
    Messages:
    2,651
    Likes Received:
    267
    Location:
    London
    Agree with Peter on this one.

    I tend to clean and lube our step after every trip, its amazing the amount of muck you find. Have just cleaned ours after a 6 week trip of Scotland, and could have almost grown plants in the amount of muck cleaned out.

    Dave :thumb::thumb:
     

Share This Page