A Bit of a Drip

Discussion in 'Tech/Mech General' started by vectian, Oct 9, 2014.

  1. vectian

    vectian Funster

    Joined:
    Sep 21, 2013
    Messages:
    152
    Likes Received:
    132
    Location:
    Isle of Wight
    Seemed to have used a lot of water when we were away so I have just lifted the inspection cover above the water pump and found it wet all around the pump and white marks all around where the plastic plates meet. The pump is a SHURflo diagphragm water pump Leisure accessories Trailking 7 model2095.204.112. 7 litres /min.
    I have tried looking on line but cannot see if there is a gasket there.
    Can I just undo all the screws and try cleaning the surfaces and screw it back together or is it going to be a bit more complicated than that.
    Thanks in advance for all the helpful comments I know I'm going to get
     
  2. scotjimland

    scotjimland Funster Life Member

    Joined:
    Jul 25, 2007
    Messages:
    28,934
    Likes Received:
    25,574
    Location:
    .
    Last edited: Oct 9, 2014
  3. vectian

    vectian Funster

    Joined:
    Sep 21, 2013
    Messages:
    152
    Likes Received:
    132
    Location:
    Isle of Wight
    Thanks Jim
     
Loading...

Share This Page