12v problems Hymer B544

Discussion in 'Hymer' started by Printermick, Aug 29, 2016.

  1. Printermick

    Printermick Funster

    Joined:
    Dec 13, 2013
    Messages:
    39
    Likes Received:
    31
    Location:
    peterborough
    Just fitted a new leisure battery (Exide Gel 80ah), charged it to full charge at home before I fitted it. Had electroblock and control panel off when I fitted it.

    It now reads 13.4v but only 32ah on the control panel and will not operate the step.

    Is there anything else I need to reset for a new battery?
     
  2. Xabia

    Xabia Funster

    Joined:
    Jan 20, 2011
    Messages:
    679
    Likes Received:
    409
    Location:
    Rural Nottinghamshire
    The link to the Schaudt DT201 is here: http://www.hymerclub.co.uk/control panel 201.pdf. Don't know if this is what is fitted to your van but may help you check the amperage figure on your set up.

    Have you checked the step fuse on the Elektroblok?
     
    • Like Like x 1
    • Informative Informative x 1
  3. Printermick

    Printermick Funster

    Joined:
    Dec 13, 2013
    Messages:
    39
    Likes Received:
    31
    Location:
    peterborough
    Thanks for that, I must clearly reset the battery capacity.
     
Loading...

Share This Page