waste water pie (Elbow) (1 Viewer)

[BigClick]

Hi,

I need to replace a waste water system elbow fitting, see picture, for our Hymer B544.

Can anyone tell me what size it is and if its a general plumbing item or a specialist Motor-home item?

Thanks

 

[PaulyP]

Take the old one to a plumbers/diy place and see if they can match it.

 

[jhorsf]

Hard to tell from a picture with no sizes but it looks a bit like overflow pipe size

^{_{Subscribers  do not see these advertisements}}

 

[GJH]

Measure the diameter to find the size.

Probably 20mm, 23.5mm, 28.5mm or 40mm.

 

[TheBig1]

an excellent place to find obscure sized plastic fittings is an aquarium shop. far cheaper than a motorhome accessory shop and in most cases better quality.

for instance I replaced a load of convoluted waste pipe that kept blocking with reinforced smooth bore pvc pipe. half the cost and never had another issue with it blocking again

 

[BigClick]

Well B&Q didn't carry any :-(
Its the waste pipe from the bathroom to the grey tank

^{_{Subscribers  do not see these advertisements}}

 

[GJH]

This is a 45 degree angle rather than 90 degree but it gives the inside diameter as 28mm.

There's a 90 degree one here but maybe a shop local to you will have one in stock for comparison.

 

[BigClick]

The pipe is 28mm on closer inspection and a more scientific measuring process

 

[Plumberman]

Hi BgClick,
Try a dedicated Plumbers merchant rather than a b&q,
They should be able to size the fitting and offer you an alternative such as a mechanical fitting which will tighten onto your pipe with a compression type fitting which will suit a variety of sizes.
Hope this helps.:thumb:
Your fitting is a 90 degree elbow.

^{_{Subscribers  do not see these advertisements}}

 

[BigClick]

Hi BgClick,
Try a dedicated Plumbers merchant rather than a b&q,
They should be able to size the fitting and offer you an alternative such as a mechanical fitting which will tighten onto your pipe with a compression type fitting which will suit a variety of sizes.
Hope this helps.:thumb:
Your fitting is a 90 degree elbow.

Probably a good idea I can get them online buy it works out to a tenner with postage so might as well get a pressure side push fit from a local shop

 

[Plumberman]

Notice you are in West Midlands ,anywhere near Wolverhampton ? I carry a lot of
Fittings and if you are local could probably help,

 

[BigClick]

Notice you are in West Midlands ,anywhere near Wolverhampton ? I carry a lot of
Fittings and if you are local could probably help,

I am in Walsall

If you have the time to spare I could come to you maybe?

^{_{Subscribers  do not see these advertisements}}

 

[Plumberman]

Let me know when you are available. I'm sure I could sort something.
Look forward to meeting you,:thumb:

 

[Plumberman]

Will give you ring tommorrow

 

[BigClick]

Will give you ring tommorrow

Thanks for the call, its really great to know there are people about who want to help.

^{_{Subscribers  do not see these advertisements}}