scratch and pin prick hole on my GRP (1 Viewer)

[MR. FUSION]

Hi all, I made a small scratch and pin prick hole of about 1mm deep on the top of my white Grp roof section. Not having dealt with GRP before I am wondering what is the best way to put a patch on this ?

TIA :thumb:

 

[Dawn B]

Get some gel coat filler

 

[joner8888]

For a stop gap till you get it fixed , 2 part araldite, you can even get in white :thumb:

^{_{Subscribers  do not see these advertisements}}

 

[MikeD]

Captain Tolley

Captain Tolley's creeping crack cure - Unique multi purpose liquid sealant.

Compatible with wood, rubber, glass, metals, perspex, some rigid platics, glass fibre, ceramics, concrete, brickwork and old sealants.

This penetrating water based sealant.

Above is some of what is written on the packaging. This might work. :thumb::thumb:

 

[mentaliss]

Get some gel coat filler

Hi all, I made a small scratch and pin prick hole of about 1mm deep on the top of my white Grp roof section. Not having dealt with GRP before I am wondering what is the best way to put a patch on this ?

TIA :thumb:

yep! and its normally a yaughting chandlers item a least ours stock it that is

 

[funflair]

If it's as minimal as you suggest a little bit of white paint run in the scratch/hole will be more than enough, not worth messing about with gel coat.

Martin

^{_{Subscribers  do not see these advertisements}}

 

[treetops1]

I would go for the Gel coat 2 part filler.Handy to have to hand anyway.:thumb: