camocam1
Free Member
- Aug 28, 2012
- 1,112
- 788
- Funster No
- 22,620
- MH
- bailey approach 760 se
- Exp
- since 2012
was under the MH this afternoon cleaning off loads of mud after being away on a very wet site at the weekend and decided to have a prod about to check the floor and have found that both back corners are soft ( about 2" square) so not bad at the moment. The question is
1) can this be cut out and replaced
or
2) can I just mastic a piece of plywood over the soft area
the rest of the floor seems to be sound, van is an Ace Milano 07 which I know many have had problems with the floors and have had to had them replaced so hoping I can avoid this by making repair before it gets any worse, All damp checks in MH are fine
1) can this be cut out and replaced
or
2) can I just mastic a piece of plywood over the soft area
the rest of the floor seems to be sound, van is an Ace Milano 07 which I know many have had problems with the floors and have had to had them replaced so hoping I can avoid this by making repair before it gets any worse, All damp checks in MH are fine