The black decorative strip above my cooker is peeling off which I suspect is due to the bond breaking down as a result of heat/moisture coming out the top of the oven. (I'm aware that this has happened on other Autotrail's too).
If I draw to the attention of the dealer they will ask me to bring in for inspection with the fuel cost alone probably exceeding the cost of repair and so I'm considering doing this myself.
The strip is about 50 mm wide and about 1.3M in length and my plan is to pull off the old strip which appears to a kind of very thin cloth/paper cover and bonding a heat resistant decorative strip in place.
I have tried searching the internet without much success and I did find a factory that offered heat resistant glass cut to size but this was far to expensive, well over £150.00.
Has anyone a cost effective solution to this problem ? I would welcome your thoughts on the matter.
Thanks in Advance,
Philip
If I draw to the attention of the dealer they will ask me to bring in for inspection with the fuel cost alone probably exceeding the cost of repair and so I'm considering doing this myself.
The strip is about 50 mm wide and about 1.3M in length and my plan is to pull off the old strip which appears to a kind of very thin cloth/paper cover and bonding a heat resistant decorative strip in place.
I have tried searching the internet without much success and I did find a factory that offered heat resistant glass cut to size but this was far to expensive, well over £150.00.
Has anyone a cost effective solution to this problem ? I would welcome your thoughts on the matter.
Thanks in Advance,
Philip