Bulk LPG advice please (1 Viewer)

[icantremember]

We have finally decided we want to have a bulk LPG tank installed under our Autocruise Augusta which is on a low profile Alko chassis.

To this end I am looking for any advice please on suitable systems and suppliers / fitters together with any pros & cons.

Cheers, Brian

 

[JeanLuc]

Rather a long way from you as they are in in Thirsk, but a call to Autogas might be useful. I talked to them a while ago about options and found them very helpful.

Broken Link Removed

 

[icantremember]

Rather a long way from you as they are in in Thirsk, but a call to Autogas might be useful. I talked to them a while ago about options and found them very helpful.

Broken Link Removed

Thanks Philip although they are not too close I will certainly speak to them

^{_{Subscribers  do not see these advertisements}}

 

[rainbow chasers]

I would advise looking for autogas fitters in your area, and 'check' them out. Ideally, see if you can find one that fits autogas and is conversant with motorhomes, and alko chassis in particular. Alko chassis cannot be drilled - so make sure that they are aware of this and have a cradle to fit.

You other options, would be looking at the refillable bottles and weighing them up against the larger tanks. It may work out beneficial to have the individual bottles, which fill from the autogas pumps.

Do remember though, that you DO NOT have to pay the tax on LPG road fuels - the garage should discount the vat for heating purposes.

Sorry I cannot aid you with fitters in your area, but do check that they know what they are dealing with first, as some may be unaware with the Alko chassis and its' adversion to being modified.

 

[Brisey]

Hi Brian, check out Conrad Anderson, they are based near Birmingham.

Link Removed

Brisey.

 

[icantremember]

Hi Brian, check out Conrad Anderson, they are based near Birmingham.

Link Removed

Brisey.

Hiya Brian, I spoke to them earlier today & they seem very helpful.

^{_{Subscribers  do not see these advertisements}}

 

[jhorsf]

you could always ring Dave and ask for advice he fits systems also

http://www.davenewell.co.uk/

 

[icantremember]

you could always ring Dave and ask for advice he fits systems also

http://www.davenewell.co.uk/

I thought Dave only did the cylinders and not under floor tanks but I will contact him.

Cheers, Brian

 

[jhorsf]

I do not know for sure what Dave does but its always worth asking him as at least you know if he does it you will good a good job done

^{_{Subscribers  do not see these advertisements}}

 

[icantremember]

you could always ring Dave and ask for advice he fits systems also

http://www.davenewell.co.uk/

I thought Dave only did the cylinders and not under floor tanks but I will contact him.

Cheers, Brian

I have just checked with Dave and as suspected he only does the refillable cylinders and not the underslung bulk tanks.