Touchwood
Free Member
- Aug 23, 2011
- 772
- 733
- Funster No
- 17,874
- MH
- Compass Avantgarde 140
- Exp
- 5 years and learning
The waste water drain on my MH needs some attention - I assume it's not unusual for this to block with grease etc. but I want to change the arrangement somewhat as well as cleaning it.
Currently there is a length of grey plastic corrugated hose (32mm?) with a valve on the end. This locates into a spring clip on the underside of the van while in transit, and is unclipped and dropped into the side inlet on a black waste water container whilst on site. The whole arrangement needs re-vamping, finding the spring clip by touch alone is an awful fiddle, the valve is very stiff, and the weight of the full container is considerable when having to lug it to a waste water disposal.
So - something like a wastemaster is an obvious step - there's a few on e-bay, or can you lot recommend an alternative? Also I'd like to replace the dangly valve and hose with a more solid arrangement that doesn't require me to fiddle about under the van - anyone done a similar conversion?
As usual all advice and help gratefully received. :thumb:
Mike
Currently there is a length of grey plastic corrugated hose (32mm?) with a valve on the end. This locates into a spring clip on the underside of the van while in transit, and is unclipped and dropped into the side inlet on a black waste water container whilst on site. The whole arrangement needs re-vamping, finding the spring clip by touch alone is an awful fiddle, the valve is very stiff, and the weight of the full container is considerable when having to lug it to a waste water disposal.
So - something like a wastemaster is an obvious step - there's a few on e-bay, or can you lot recommend an alternative? Also I'd like to replace the dangly valve and hose with a more solid arrangement that doesn't require me to fiddle about under the van - anyone done a similar conversion?
As usual all advice and help gratefully received. :thumb:
Mike