foglight obscured (1 Viewer)

[mike mcglynn]

Hello all Can I ask for some advice Ive had a towbar fitted and it obstructs the foglight what wire type/size do I need to move it to a better position also is this a fail on mot thanks in advance
mike

 

[pappajohn]

fail !!! i'd say yes.

wire...same size as already used but make sure the joint is waterproofed.

 

[upmarkethippy]

fail !!! i'd say yes.

wire...same size as already used but make sure the joint is waterproofed.

if you use vaseline on the joints, it will help keep moisture out....

^{_{Subscribers  do not see these advertisements}}

 

[rainbow chasers]

Just grab some heat shrink and slide over soldered joints and you will be fine.

Each Fog will draw 4.5a on a 55w bulb - so 10a cable will do nicely!

Let me know how much you want and I'll throw some in a envelope for you!

 

[aba]

Just grab some heat shrink and slide over soldered joints and you will be fine.

Each Fog will draw 4.5a on a 55w bulb - so 10a cable will do nicely!

Let me know how much you want and I'll throw some in a envelope for you!

most rear fog lights are only 21w bulb though

 

[rainbow chasers]

most rear fog lights are only 21w bulb though

Always go by the maximum probable load! :thumb:

^{_{Subscribers  do not see these advertisements}}

 

[pappajohn]

most rear fog lights are only 21w bulb though

i believe that is the maximum allowed under vehicle lighting regulations....just as 60watt is the legal max headlamp rating.