scotjimland
LIFE MEMBER
- Jul 25, 2007
- 2,259
- 9,792
- Funster No
- 15
- MH
- A Woosh bang
Follow along with the video below to see how to install our site as a web app on your home screen.
Note: This feature may not be available in some browsers.
Subscribers do not see these advertisements
Also installed my own lpg gas cooker and would be the first to admit Im not competent but hey ho no can stop me. I used 10mm soft drawn copper for the 10m pipe run to the gas bottle and connected inside the house using some rubber hose I had lying around and stuck this over the end of the copper.
Works fine and cost me nothing as the bits were lying around to hand
thanks for link ..
did you see this post on the DIY forum ..
Subscribers do not see these advertisements
Sorry but you can`t fit a cooker on ridgid pipe it has to be on a flexible hose with a bayonet also yes it has to have the red band on it to identify it as LPG, and a stabilizing chain.you will need an lpg cooker hose(not a natural gas one)
think they have a red band on them
unless you fit it rigid (copper or iron pipe)