Floored! (1 Viewer)

jennymaywright

Free Member
Aug 21, 2009
95
5
Shropshire
Funster No
8,089
MH
Low Profile
Exp
4
Can anyone give us some advice about repairing an area of floor that has delaminated? Is it possible to do this yourself?

Jenny & Dave
 

Snowbird

LIFE MEMBER
Apr 24, 2009
11,818
22,345
Liverpool.
Funster No
6,422
MH
Fifth wheel.
Exp
Since 11-05-2000
Yes you can do it yourself,there is a kit available that you inject into the cavity,but am afraid it s not cheap.
 

hilldweller

LIFE MEMBER
Dec 5, 2008
605
36,109
Macclesfield
Funster No
5,089
MH
Zilch Mk1
Exp
From Aug 2007
Can anyone give us some advice about repairing an area of floor that has delaminated? Is it possible to do this yourself?

Jenny & Dave

Why ever not if you have the skills and the time and if it's really serious undercover working.

How bad is it ? How easy is it to get at ?

I've seen this problem reported on the forums many times connected with Swift who failed to seal a joint somewhere - so you do it you need also to find why it is delaminating and cure that as well.

Subscribers  do not see these advertisements

 

scotjimland

LIFE MEMBER
Jul 25, 2007
2,244
9,751
Funster No
15
MH
A Woosh bang
From another forum

Modern caravan floors and walls are made of sandwich construction. The floors are constituted of upper and lower sheets of thin plywood bonded to a styrofoam core, while the walls comprise the outer aluminium and the inside wallboard bonded to a polystyrene core. If the bond breaks down, delamination takes place. This is more likely to happen to the floor, which then feels spongy. The obvious sign of wall delamination is the aluminium panel bulging outwards. Both forms of delamination can be effectively cured using a specially-formulated epoxy resin.

To repair a delaminated floor:

1. Remove carpet.
2. Drill holes in a matrix pattern to the affected area.
3. Tape up any floor joints under floor to prevent glue escaping.
4. Inject the 2 part epoxy resin into holes until resin comes out of surrounding holes.
5. Insert wooden dowels into holes to add additional strength, similar to steel rods in concrete.
6. Wipe up any excess resin.
7. Allow 24-48Hrs for resin to harden.
8. Assess treated area and if area still moving repeat steps 3-7.
9. Once area is solid, sand back heads of dowels and any excess dry resin.
10. Relay and fix carpet.

Kit

Link Removed
 

hilldweller

LIFE MEMBER
Dec 5, 2008
605
36,109
Macclesfield
Funster No
5,089
MH
Zilch Mk1
Exp
From Aug 2007
Modern caravan floors and walls are made of sandwich construction.

Our's isn't. Half inch plywood here. There's an underfloor battery box to prove it.

After that there is a further floor a few inches below.

Proper job from Burstner.

Subscribers  do not see these advertisements

 

Join us or log in to post a reply.

To join in you must be a member of MotorhomeFun

Join MotorhomeFun

Join us, it quick and easy!

Log in

Already a member? Log in here.

Latest journal entries

Funsters who are viewing this thread

Back
Top