Hymer Hinges (1 Viewer)

[breeks]

looking for hinges for the top half of stable door for 95 hymer i know they are discontinued wonder if it would be possible to fit difrent hinges

 

[Terry]

I am pretty sure you would get different hinges to fit
terry

 

[rosalan]

I googled 'Caravan hinges for doors' and there seemed to be plenty that were, if not identical (from your picture) were usable for your purpose.
Good luck!
Alan

^{_{Subscribers  do not see these advertisements}}

 

[greyman1]

are your hinges actually snapped or will they just not hold in position ?

 

[bjandlin]

They are out there somewhere, came across them whilst searching something else, can't think where at the moment, I'll have a look later.
Barrie.

 

[scotjimland]

Hymer spares.. links on this thread ..

Peter Hambilton can obtain most Hymer spares

http://www.motorhomefun.co.uk/forum/threads/hymer-spares.107568/#post-1405812

^{_{Subscribers  do not see these advertisements}}

 

[bjandlin]

https://caravan-parts.store.buegle....locker-hinges-hymer-caravan-gas/?k=:::5946223

Try this link.
Barrie

 

[breeks]

are your hinges actually snapped or will they just not hold in position ?

0ne broke the other the top one i got new a while back from brownhills but the door never sat right with this hinge which caused the other to snap i have asked in germany when there they said didint have a single one.

 

[greyman1]

ok i understand, the reason i asked was when i first got my van with the same split door, the upper half kept dropping . i presumed the hinge was damaged/faulty but it was infact the thread on the captive nut fitted in the doorseal rail. once i had removed the weatherstrip and replaced the nut it has been troublefree since . regards garry

^{_{Subscribers  do not see these advertisements}}

 

[Manic]

Would these be any good
http://pages.ebay.com/link/?nav=item.view&alt=web&id=171774371654

 

[breeks]

Would these be any good
http://pages.ebay.com/link/?nav=item.view&alt=web&id=171774371654

no i have seen these before thanks for your reply