Omnistore 3 Speed Roof Vent (1 Viewer)

[rolandrat]

Does anyone know the procedure to remove the fan motor for replacement. I can see that there are 2 screws securing the inner blind surround and I presume there will be something else to take into consideration. I don't want to exert to much force pulling it down as there seems like there's some resistance like hidden catches. Any help would be appreciated.

 

[pappajohn]

The motor is secured by two screws from the outside.
Open the vent fully and get on the roof.

Not sure how the fan is fixed to the motor....could be a press fit or maybe a grub screw.
new motor is around £90.

are you sure it isnt the 3 speed control board thats failed.
i would expect that before a fan failure.

Look carefully and the screws can be seen left and right of motor.

Broken Link Removed

 

[rolandrat]

The motor is secured by two screws from the outside.
Open the vent fully and get on the roof.

Not sure how the fan is fixed to the motor....could be a press fit or maybe a grub screw.
new motor is around £90.

are you sure it isnt the 3 speed control board thats failed.
i would expect that before a fan failure.

Look carefully and the screws can be seen left and right of motor.

Broken Link Removed

------------------------------------------------------------------------------------------
Thanks for the info, I'll take a look.

^{_{Subscribers  do not see these advertisements}}