Exhaust for Hymer B544 2002/3 (1 Viewer)

jumar

LIFE MEMBER
Nov 6, 2012
3,688
11,206
Spain
Funster No
23,578
MH
Hymer Tramp
Exp
Since 1994
Does anyone know where I can buy an exhaust for a Hymer B544 year 2002 in the Mansfield or surrounding areas.
 

davejen

Free Member
Aug 21, 2008
1,861
1,235
Preston
Funster No
3,770
MH
Given up travelling
Exp
Since 1992
Is it a Merc or Fiat? I have a brand new Merc tailpipe (std Merc ) for sale £20.00.
Cheers, Dave(y)

Subscribers  do not see these advertisements

 
OP
OP
jumar

jumar

LIFE MEMBER
Nov 6, 2012
3,688
11,206
Spain
Funster No
23,578
MH
Hymer Tramp
Exp
Since 1994
Thanks. But unfortunately it's a Fiat.
 
OP
OP
jumar

jumar

LIFE MEMBER
Nov 6, 2012
3,688
11,206
Spain
Funster No
23,578
MH
Hymer Tramp
Exp
Since 1994
Parts of the exhaust (tail pipe etc) may be hymer commissioned and only available from hymer.
Thanks. Beginning to think it's going to be an expensive job. Seen on old threads that custom made may be necessary unless anyone else has any other ideas. Been told three months needed to make in stainless steel.

Subscribers  do not see these advertisements

 
OP
OP
jumar

jumar

LIFE MEMBER
Nov 6, 2012
3,688
11,206
Spain
Funster No
23,578
MH
Hymer Tramp
Exp
Since 1994
My enquiry,which was for a non Funster friend turned out initially to come to a dead end, this resulted in a proposed trip to Portugal being cancelled. Then by chance along came this....Phil Littlewood of Stanfree,nr Chesterfield, who happens to be a relation of ours and who operates as a MOT tester, Mechanic and BMW rally car constructor, offered to make a complete system for the Hymer. Two days later he had built a complete custom made Stainless Steel system. So Phil would like anybody who needs the same service to contact him. At the moment we are away from home,so contact details are not at hand, I will post next Sunday,28th some more details. Feel free to contact me or post on, for more info.Please do not book a fitting for first week in July, that's reserved for me.
 

JockandRita

LIFE MEMBER
Aug 2, 2007
11,402
148,454
Lincs/Cambs border
Funster No
49
MH
N+B Flair 8000i
Exp
Since May 05 (Ex Tuggers).
Does anyone know where I can buy an exhaust for a Hymer B544 year 2002 in the Mansfield or surrounding areas.
Are you absolutely sure that it's not a standard Fiat Ducato exhaust, with a simple tail pipe extention added on?
Our Hymer exhaust is, but being LHD, I will have to source our replacement from the EU.

Cheers,

Jock.
 
OP
OP
jumar

jumar

LIFE MEMBER
Nov 6, 2012
3,688
11,206
Spain
Funster No
23,578
MH
Hymer Tramp
Exp
Since 1994
Hi Jock, the replacement has been custom made in Stanfree, Nr Chesterfield, a totally satisfied customer, please read my post of today for all the details before you or others start looking in the EU for systems.
Jumar.(retired SYFRS)

Subscribers  do not see these advertisements

 

JockandRita

LIFE MEMBER
Aug 2, 2007
11,402
148,454
Lincs/Cambs border
Funster No
49
MH
N+B Flair 8000i
Exp
Since May 05 (Ex Tuggers).
Hi Jock, the replacement has been custom made in Stanfree, Nr Chesterfield, a totally satisfied customer, please read my post of today for all the details before you or others start looking in the EU for systems.
Jumar.(retired SYFRS)
Hi Jumar,

I was referring to your original post on Dec 6th, ie, looking for a replacement. I'm glad that your friend got sorted in the end.

I could easily get a standard exhaust off the shelf, but for a RHD only, which would mean the tail pipe would exit the bodywork right underneath the habitation door. :xsad: Techno100 and I have been able to source standard LHD replacements from the EU, which are very reasonably priced including delivery and a with 2-3 year warranty, pending supplier. No exhaust retailer in the UK would supply a LHD exhaust, when I enquired. :xsad:

I may give your contact in Chesterfield a ring, before ordering from the EU, so look forward to reading further details. :xThumb:

Cheers,

Jock. (Ret'd CF&RS. :wink:)
 
OP
OP
jumar

jumar

LIFE MEMBER
Nov 6, 2012
3,688
11,206
Spain
Funster No
23,578
MH
Hymer Tramp
Exp
Since 1994
OK, returning to base (Totana,Spain) on Sunday, more details will be posted then. The exhaust systems are being custom made in Stainless.
Jumar.
 

margrae

Free Member
Oct 18, 2009
34
16
Newcastleton, Scottish borders
Funster No
8,951
MH
A Class
Exp
8yrs
Hi
I need a new exhaust on my B564, mines is RHD and the current exhaust exits just past the habitation door ( ie nearer the rear of the vehicle) The coach build is obviously a left hand as the habitation door is on the drivers side. I am assuming I could get an 'off the shelf' exhaust ?

Subscribers  do not see these advertisements

 

jonandshell

Free Member
Dec 12, 2010
5,476
8,299
Norfolk
Funster No
14,648
MH
Not got one!
Exp
Since 2006
3 months for a stainless exhaust?

That's ridiculous! Mine took 3 hours!
 

JockandRita

LIFE MEMBER
Aug 2, 2007
11,402
148,454
Lincs/Cambs border
Funster No
49
MH
N+B Flair 8000i
Exp
Since May 05 (Ex Tuggers).
Hi
I need a new exhaust on my B564, mines is RHD and the current exhaust exits just past the habitation door ( ie nearer the rear of the vehicle) The coach build is obviously a left hand as the habitation door is on the drivers side. I am assuming I could get an 'off the shelf' exhaust ?
Yes Margrea, you should be able to get a standard off the shelf system...............providing the converter (Hymer) didn't have the exhaust modified to fit.
The year and model of Ducato will determine which system applies to your vehicle.

Here is a link to some images of Ducato systems for you to compare with yours.
Broken Link Removed

HTH,

Jock. :)
 

margrae

Free Member
Oct 18, 2009
34
16
Newcastleton, Scottish borders
Funster No
8,951
MH
A Class
Exp
8yrs
Thanks Jock

As far as I can see it looks like a standard one.....

Subscribers  do not see these advertisements

 

Attachments

  • P2060116.JPG
    P2060116.JPG
    159.8 KB · Views: 23
  • P2060117.JPG
    P2060117.JPG
    145.7 KB · Views: 21

margrae

Free Member
Oct 18, 2009
34
16
Newcastleton, Scottish borders
Funster No
8,951
MH
A Class
Exp
8yrs
Update....its not standard
A fiend of mine is going chop the standard one and weld the custom bits on. The old one has had bits welded on it.
 

Attachments

  • P2150145.JPG
    P2150145.JPG
    101.2 KB · Views: 21

Join us or log in to post a reply.

To join in you must be a member of MotorhomeFun

Join MotorhomeFun

Join us, it quick and easy!

Log in

Already a member? Log in here.

Latest journal entries

Funsters who are viewing this thread

Back
Top